Requirements for car stamping mold work parts materials
Release time:
2022-05-07
When working on stamping molds, to withstand the loads of impact, vibration, friction, high pressure and stretching, bending, and even work at high temperatures (such as cold squeeze)
When working on stamping molds, to withstand the loads of impact, vibration, friction, high pressure and stretching, bending, and even work at high temperatures (such as cold squeeze), the working conditions are complicated, and it is prone to wear, fatigue, break, deformation, deformation. Waiting for phenomenon. Therefore, the requirements for mold work parts are higher than ordinary parts.
Due to the different working conditions of various types of stamping molds, the requirements of mold work parts materials are also different.
1. The requirements for the requirements of the tailoring material for the working parts of the thin plates are required to have high wear resistance and hardness, and the thick plate breeding mold is required to have high wear resistance and pressure -resistant and yielding points. To prevent the mold from broken or collapsed, it should also have high fracture resistance, high bending strength and toughness.
2. The requirements for the requirements of the deep mold materials require that the material of the mold work parts has good anti -adhesive (bite), high abrasion resistance and hardness, a certain strong toughness, and good cutting processing performance, and deformation during thermal treatment during thermal treatment To be small.
3. Requirement of the cold extrusion molding material requires the mold working parts with high strength, hardness, and abrasion resistance. In order to avoid impact breaks, there is also a certain toughness. Because it will increase when squeezing, it should also have a certain amount of heat -resistant fatigue and thermal hardness.
The design, manufacturing, stamping, and processing of cold molds, inspection, and welding fixtures in the car body in the car body integrates modern companies
HUANGHE DIE & MOULD
Tel: +86-317-8185763
Fax: +86-317-8195836
Mobile: +86-13931761677
Email: hhmj88@163.com
Address: Nanfuzhuang Development Zone, Botou City, Hebei Province
Copyright © 2022 Cangzhou Huanghe Die & Mould Co., Ltd.