Teach you how to maintain car molds
Release time:
2022-05-05
The first -level maintenance of the car mold refers to the operator to carry out the mold and daily maintenance in the production. The main content is cleaning, lubrication and inspection.
Demo -level maintenance
The first -level maintenance of the car mold refers to the operator to carry out the mold and daily maintenance in the production. The main content is cleaning, lubrication and inspection.
1. Maintenance when installing mold
Wipe the upper and lower surfaces of the mold before installing the mold to ensure the parallel degree of the mold installation surface and pressure machine work table and the molten installation surface installed in the production.
After the mold is installed, open the mold and clean each part of the mold, especially the guide mechanism. For the surface of the surface, the surface of the surface is cleaned to ensure the quality of the parts. Lubricate the sliding part of the mold and apply the fat. Each part of the mold, especially the safety parts. Such as: safety -side sales, safety screws, side guards, punching waste channels, etc.
2. Maintenance in production
Painting the corresponding part of the car mold during production. Such as: the pressure rot, rounded corner of the pull -up mold; the cutting part of the edge mold;
Clean up the waste road with a small -hole wasteway with a regular punching mold.
Maintenance after production
★ After the production, the mold should be checked comprehensive.
★ The mold is cleaned comprehensive to ensure the cleanliness of the mold.
★ Clean the waste in the mold to ensure that there is no waste in the waste box.
★ Fedback the state of the mold and the situation after use to the mold ticket on the spot.
Mold secondary maintenance
The secondary maintenance of the mold refers to the maintenance of the regular system based on the technical status and complexity of the mold. This maintenance work is completed by the mold repair personnel, and records according to the maintenance situation. The following describe the requirements and methods of the second guarantee as different parts.
Related News
The design, manufacturing, stamping, and processing of cold molds, inspection, and welding fixtures in the car body in the car body integrates modern companies
HUANGHE DIE & MOULD
Tel: +86-317-8185763
Fax: +86-317-8195836
Mobile: +86-13931761677
Email: hhmj88@163.com
Address: Nanfuzhuang Development Zone, Botou City, Hebei Province
Copyright © 2022 Cangzhou Huanghe Die & Mould Co., Ltd.